Co@SiO2核壳式纳米磁性粒子的合成、性质表征及在细胞分离和细胞芯片上的应用

合成了Co@SiO2核壳式纳米粒子,并采用透射电镜(TEM)、X射线衍射(XRD)、扫描电镜(SEM)和振动样品磁强计(VSM)对其形状、尺寸、荧光及磁特性进行了表征,探讨了其在细胞分离和细胞芯片上的应用和原理.     

Polarizability effect in metallic clusters

Langevin approach implemented in the inelastic cross-sections measured for the low-energy electrons colliding with metallic clusters points out that statical form of the polarizability dominate at energies less than 1.25 eV. The dynamical form comes into play at energies around 1.3 eV. The form of the polarizabilities indicates that polarizability of the metallic clusters is energy-dependent.     

纳米悬浮液热导率测量及其预测模型的探讨

纳米颗粒悬浮液具有广泛应用于强化传热的潜在优势。本文采用加入表面活性剂的方法提高纳米悬浮液的悬浮稳定性,并用瞬态热线法测量了热导率。在分析现有理论模型和纳米悬浮液热导率影响因素研究的基础上,从弹性传动和非弹性传动两方面分析了纳米尺度效应导致纳米悬浮液热导率提高的机理。发现已有的理论公式仍然存在一定欠缺,预测值比实验值偏低,有关机理尚有待于深入探讨。     

卵形钢弹对铝合金靶板侵彻问题的数值模拟

 基于球形空穴膨胀理论（SCE），采用ABAQUS有限元商业软件并结合其子程序的二次开发功能对钢弹侵彻金属靶进行3D有限元数值模拟。根据空穴膨胀理论，靶体对侵彻弹体的影响可以用一个作用在弹体表面的力函数代替，这样在进行数值模拟时就无须划分靶体网格，也避免了复杂的接触问题，从而使模拟大大简化。模拟所用卵形弹为VAR 4340钢弹，靶体为6061-T6511铝合金。模拟过程中考虑到弹体的可变形性和入射时的微小偏航角等实际情况，并且考虑到了弹身在运动过程中和靶体的接触分离效应。所得模拟结果与文献中的实验结果进行了比较，发现模拟结果与实验结果吻合得很好，并得到了一些有意义的推论。     

Effect of particle charging on momentum and heat transfer from rarefied plasma flow

The features of interaction of a spherical metallic particle with a rarefied thermal plasma flow due to the presence o charges-electrons and ions in the gaseous phase-are considered. Analytical expressions describing charge, momentum, and energy exchange between the plasma and the particle für the cases of strong and weak Debye screening are obtained. It is illustrated that the efficiency of particle heating in the plasma considerably grows as compared with a hot molecular gas due to participation of electrons and ions in file transfer processes.     

Metallic radii of nonmetals

Experimental data are used to determine the atomic volumes and radii of the elements of subgroups IV–VIIA in the structures of metallic phases at high pressures. Metallic radii of nonmetals are compared with values based on Pauling and Goldschmidt calculations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 220–222, February, 1994.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

纳米金对荧光素的荧光增效作用

纳米金对荧光素的荧光效率具有增强作用,其增强效果取决于纳米金的尺寸大小和浓度。粒径分别为5、15、25 nm的纳米金与不同浓度的荧光素溶液作用后可以增强荧光强度3~10倍,同时讨论了溶液环境和pH值对荧光增强的影响。采用本实验提出的方法可以在生化检测方面提高荧光检测方法的灵敏度。     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

Formation of long range ordered arrangement of quantum dots with the help of lateral centripetal flow

A simple “chimney” method was used to eliminate the voids in an arrangement of quantum dots sized 2 nm on a solid substrate, which resulted in a large well ordered superlattice of area in the order more than 1 μm². Based on the principle of speeding up the interparticle interaction of nanoparticles to overcome the particle-substrate one, a lateral centripetal force originated from a glass tube acting as a chimney in a simple evaporation device is imposed. This method allows the packing process to be controlled in a mechanical force field, that is, with the same nanogold dispersion different patterns on a substrate—from separate dots to an ordered compact monolayer or even a multilayer structure—could be easily obtained.